Skip to content
Advanced course · 9 min

Inputs and application for olives

Check a copper treatment against the days left before harvest, work out the amount for a 2,000 L sprayer, see what may share the tank, keep count of copper over the year, and learn what changes for table olives.

The whole course in one video
  1. 1

    Pick the plot first

    Open a new chat and tap Plots (All) under the question box. Choose the plot you want advice for. ORTH then works from that plot’s crop, variety, soil and documents, and from the farm weather.

    For olives Pick one plot of one variety. We picked Lote 1: Picual for oil, 2.74 ha of calcareous clay soil with two drip lines per row, 780 single-trunk trees from March 2008 at 7 × 5 m. The fruit is changing colour and the harvest for oil has not started. Every number below is for that plot.

  2. 2

    Start from the Machinery & Equipment button

    For doses and sprayers, tap Machinery & Equipment. ORTH can calibrate your sprayer for a product rate and tank size, check whether your pump and emitters can deliver a plan, or turn a fertigation recipe into injector settings.

    For olives For olives we asked about copper against peacock spot, before harvest and again after it. We typed the question, with the harvest date and the size of the sprayer.

  3. 3

    Name the product, not the active ingredient

    We asked about copper, urea and potassium nitrate. ORTH answered first that copper is an active ingredient, and that Spain’s register authorizes products, so it asked for the trade name. It then listed ten registered copper products for olive against peacock spot and three alternatives. The entries differ: most copper products have 14 days before harvest and one has 15; the maximum number of applications changes from product to product; some require drift-reducing nozzles; only some allow a treatment after harvest. Potassium nitrate is not in the register because it is a fertilizer. ORTH noted that this does not forbid using it as a fertilizer, but it gives no clearance for a tank mix with a plant protection product. Always follow the product label.

  4. 4

    Count the days before harvest

    Harvest starts around 26 November and we asked on 12 November. ORTH counted for a product with 14 days before harvest: applied on 12 November, the earliest harvest is 26 November; applied on 13 November, it is 27 November; applied on 21 November, after the rain, it is 5 December. The canopy was wet and rain was forecast until about 20 November. On the entry with 15 days, ORTH printed a warning that the interval is longer than the time left before harvest. Its advice: do not make the treatment before harvest if the date stays at 26 November, and treat after harvest with a product whose label names that use. The same count applies to every product you put on fruit that is still on the tree.

  5. 5

    Calibrate, then work out the tank

    For a worked example ORTH took a registered copper with 50% copper, at 1.5 to 2 kg per hectare in 600 to 1,000 L of water. For these mature trees it starts the calibration at 800 L/ha and goes toward 1,000 L/ha only if the inside and the top of the canopy stay poorly covered, without runoff. At 800 L/ha a 2,000 L tank covers 2.5 ha and carries 3.75 to 5 kg of product. Lote 1, with 2.74 ha, takes 2,192 L and 4.11 to 5.48 kg: one full tank and a second load of 192 L with 0.36 to 0.48 kg. To calibrate with rows 7 m apart: litres per hectare are 600 times the total nozzle flow in L/min, divided by the speed in km/h times 7. Measure the real speed and the output of every nozzle for one minute. The example does not carry over to another product.

  6. 6

    Near harvest, copper goes alone

    We asked whether urea, potassium nitrate or an insecticide can share the tank. ORTH’s answer for a treatment near harvest: apply copper alone. Urea or potassium nitrate go in only if the labels of both products allow the mix, because fertilizer salts and the pH of the water can free more copper or break the suspension, and that marks leaves and fruit. An insecticide comes into question only when monitoring shows a pest that justifies it, the product is registered for olive, its pre-harvest interval fits the harvest date and both labels allow the mix. A jar test shows an obvious physical problem. It does not prove that the crop is safe or that the labels allow the mix.

  7. 7

    Keep count of the copper

    The label of the example product caps use at 8 kg of product per hectare per season, with no more than 5 applications and 18 days between them. At 50% copper that is 4 kg of copper per hectare. For the 2.74 ha of Lote 1 the cap is 21.92 kg of product, or 10.96 kg of copper. ORTH’s rule for the record: count the copper itself from every copper product used in the season, including the treatment after harvest, and do not just add up kilograms or litres of product, because the concentrations differ a lot. Another product has its own cap, its own number of applications and its own interval. Give ORTH the trade name or the registration number and it checks that product in the register.

  8. 8

    What changes for table olives

    For table olives picked green by hand, ORTH is more careful, because the look of the fruit and the residues count for more. Use only a copper product authorized for olive against peacock spot, and avoid heavy deposits that stain or mark fruit for sale. The water volume stays in the label range of 600 to 1,000 L/ha, starting near 800; picking by hand does not change it. Before harvest, copper goes alone. Respect the exact interval on the label: for a harvest on 26 November, a product with 14 days had to go on by 12 November, and one with 15 days was already too late. Count the copper from every product over the year. ORTH would skip a doubtful treatment before picking and spray once the fruit is off. Always follow the product label.

Tip. Write the copper of each treatment in the plot’s records as kilograms of copper per hectare. That is the figure you can add up across products.

Check yourself

1. A product with 14 days before harvest is applied on 21 November. When is the earliest harvest?

2. At 800 L/ha, how much water does the 2.74 ha of Lote 1 take?

3. What does a jar test show?

4. What do you count toward the yearly copper limit?

Sources: MAPA: Registro de Productos Fitosanitarios

More courses for olive

Inputs and application

Meet ORTH at DATAGRI 2026 · Valladolid, 18–19 Nov · 10% off ORTH Teams & EnterpriseClaim your 10%