Skip to content
Advanced course · 11 min

Irrigation and water for citrus

Build this week’s irrigation schedule from rain, soil and weather, turn millimetres into hours and litres per tree, and save it as actions.

The whole course in one video
  1. 1

    Start from the Irrigation button

    Pick the plot and tap Irrigation. ORTH offers questions such as this week’s schedule, a water-quality check, or turning the water requirement into runtime for your system. Tap one to ask it.

    For citrus Close to harvest, ORTH plans water for fruit quality as well as volume. Here it treated the clementines as being at colour change and held back after the rain.

  2. 2

    Get this week’s schedule

    On Mandarinos, we tapped Build this week’s irrigation schedule for this plot. ORTH built a day-by-day table with ET₀, forecast rain, soil moisture and a decision per day. After 49.1 mm of rain on clay from 18 to 20 October, it held irrigation for three days and allowed at most two morning events, 4 mm on 26 October and 3 mm on 28 October, each only if the root zone at 20 to 30 cm is no longer wet.

  3. 3

    Read why, and how sure ORTH is

    ORTH treated the clementines as close to harvest, at colour change, when too much water hurts fruit quality and keeps clay soil wet. It rated the schedule four stars and said what was missing for exact runtimes: emitter flow, emitters per tree and system efficiency.

  4. 4

    Turn millimetres into hours and litres per tree

    We told ORTH each tree has two drippers of 4 L/h, with about 90% efficiency. It asked for the tree count first (5 by 3 m, about 780 trees), then converted: 8 h 20 min and 67 L per tree on 26 October, and 6 h 15 min and 50 L per tree on 28 October, with the calculation shown. A catch-can test on a few drippers confirms the real flow.

  5. 5

    Save the schedule as actions

    Tap Review 4 Actions to see each day’s instruction, from checking the root zone to skipping an event if the soil is still wet, then tap Create 4 Actions.

  6. 6

    Ask what changes for your citrus

    Orange and grapefruit use about the same water as Clemenules, or slightly more with a larger canopy and a longer season. Lemon needs a steadier supply because growth, flowering and harvest overlap, and is often the most sensitive to salt. Lime uses less per tree but tolerates a missed irrigation worst, especially at flowering in hot weather. All of them suffer in waterlogged soil, so the rule stays: schedule from ET, canopy and soil moisture, and on clay check 20 to 30 cm deep before you irrigate.

Tip. Put emitter flow, emitters per tree and spacing in the plot profile. On our example farm, ORTH had to ask for the tree count in two separate chats because it was missing.

Check yourself

1. Why did ORTH hold irrigation at the start of the week?

2. What decides whether the 26 October event goes ahead?

3. What did ORTH need to give the runtime in hours?

4. Which citrus tolerates a missed irrigation worst?

More courses for citrus

Irrigation and water

Meet ORTH at DATAGRI 2026 · Valladolid, 18–19 Nov · 10% off ORTH Teams & EnterpriseClaim your 10%