Skip to content
Advanced course · 11 min

Inputs and application for tomato

Find what you can spray three weeks before harvest with bumblebees in the greenhouse, work out the dose for your tank, and put a biological through the drip without killing it.

The whole course in one video
  1. 1

    Start from the Machinery & Equipment button

    For doses and sprayers, tap Machinery & Equipment. ORTH can calibrate your sprayer for a product rate and tank size, check whether your pump and emitters can deliver a plan, or turn a fertigation recipe into injector settings.

    For tomato In a greenhouse, many inputs go through the drip. Convert this fertigation recipe into injector and stock-tank settings is the button for that. For sprays, ask for the dose per hectare and per tank together.

  2. Case 1

    Powdery mildew three weeks before harvest

  3. 2

    Ask what you can spray now, and for which tank

    We asked what to spray against powdery mildew starting on the lower leaves, with harvest from 15 November and bumblebee hives in the greenhouse: the product, the dose per hectare and per 1,000-litre tank, the pre-harvest interval, and whether it is safe for the bumblebees. ORTH showed ten of the 110 products authorised in Spain for this use, each with its dose and pre-harvest interval.

  4. 3

    Read the first choice, the tank formula and the bee rules

    With harvest close, ORTH’s first choice was LALSTOP G46 WG, a biological fungicide, or ARMICARB GARDEN, a bicarbonate contact product. For the tank it gave a formula instead of assuming one tank covers one hectare: product per tank = label dose per hectare × (1,000 ÷ your calibrated spray volume in L/ha). It could not confirm any product as fully safe for bumblebees, so spray after they are back in the hive and follow the hive supplier’s protocol.

  5. Case 2

    A biological through the drip

  6. 4

    Ask whether a biological can go in with the fertigation

    We asked whether a Trichoderma product can go through the drip in the same injection as calcium nitrate, potassium nitrate and acid. ORTH said no: concentrated salts, and above all the low pH at the acid injector, can kill the spores. Its order: fertigate first, stop every injector, flush with clean water until the farthest dripper is back to the EC and pH of the source water, then inject the Trichoderma alone from a clean tank.

  7. 5

    Separate them with a clean-water flush

    ORTH gave no fixed number of hours. The Trichoderma can follow once clean water has pushed the fertilizer and acid out to the farthest dripper; if you cannot check that, give it its own irrigation without fertilizer or acid. Do not over-flush afterwards, or the sandy soil carries it below the roots. ORTH asked for the trade name and registration number to confirm the drip use and dose on the label.

  8. For every dose question

  9. 6

    Use Advanced for doses, plans and diagnosis

    Tap the level next to the microphone. Core gives quick answers and weather checks. Advanced reasons more deeply for spray programs, disease diagnosis and fertilization plans, and can take a minute or two. Auto lets ORTH choose. Every answer in this course used Advanced.

    For tomato Stay on Advanced for doses near harvest and for anything that goes through the drip. In these answers ORTH checked Spain’s register for this crop and disease, the pre-harvest interval and the bumblebees.

Tip. Calibrate the sprayer before you trust a dose per tank. ORTH’s formula only works with the spray volume per hectare you really apply.

Check yourself

1. A label says 6 L/ha and you spray 1,500 L/ha. How much goes in a 1,000-L tank?

2. Why should Trichoderma not go in with the acid injection?

3. How do you know the line is clean before the Trichoderma goes in?

More courses for tomato

Inputs and application

Meet ORTH at DATAGRI 2026 · Valladolid, 18–19 Nov · 10% off ORTH Teams & EnterpriseClaim your 10%