Skip to content
Advanced course · 12 min

Fertilization and nutrition for tomato

Read your soil and water results, get a fertigation program by stage for the greenhouse, and save it as a plan.

The whole course in one video
  1. 1

    Pick the plot first

    Open a new chat and tap Plots (All) under the question box. Choose the plot you want advice for. ORTH then works from that plot’s crop, variety, soil and documents, and from the farm weather.

    For tomato Pick one greenhouse. We picked Invernadero 1: cherry tomato on 0.84 ha, 16,800 plants planted on 1 September, sandy soil and surface drip. Every number below is for that greenhouse.

  2. 2

    Start from the Nutrition button

    Under the question box, tap Nutrition. ORTH offers five ready-made questions, from reading a soil, water or leaf test to a season-long program. Tap one and ORTH asks it straight away, or type your own question.

    For tomato In a greenhouse, nutrition runs through the drip. Start from your soil and water results: the salt and the bicarbonate in your water decide how strong the drip solution can be.

  3. 3

    Let ORTH read your soil and water results

    On Invernadero 1, we tapped Interpret my latest soil, water, or tissue test. ORTH found the soil file and named three constraints: alkaline pH (7.9), a raised salt level (EC 2.4 dS/m) and low organic matter (1.1%). Phosphorus is already high, so keep it low. It also read the water record: EC 0.9 dS/m and 4 meq/L of bicarbonate, which pushes root-zone pH up and can clog drippers. The file is marked as example data, so ORTH rated it two stars and asked for a current root-zone sample, a full water analysis and a leaf test.

  4. 4

    Ask for a fertigation program by stage

    Ask for the program in a table: target EC at the dripper and N, P, K, Ca and Mg in mmol/L, from now to the end of March. ORTH treated the crop as third-truss set and started at 1.8 dS/m, rising with crop load to 2.1 dS/m at peak harvest in January and February, then back to 1.7 dS/m at the end of the crop. Phosphorus stays low because the soil already has plenty. The field marker in the last column tells you when to move to the next stage.

  5. 5

    Read the table and the bicarbonate advice

    Tap the expand icon to see every column. The values are what reaches the dripper, including what is already in your water. For the 4 meq/L of bicarbonate, ORTH worked out a neutralisation demand of 3.0 to 3.5 meq/L, but gave no litres of acid without a water titration and injector calibration. With nitric acid, every meq/L adds about 1 mmol/L of nitrogen, so lower the N target by the same amount.

  6. 6

    Turn the program into a fertigation plan

    Ask ORTH to turn the program into a fertigation plan with one action per stage. It proposed six actions from 23 October to 21 March, each with the target EC at the dripper, N, P, K, Ca and Mg in mmol/L, and the field check before moving on: do not step up while the root-zone EC is rising. Tap Review 6 Actions, check them and tap Create 6 Actions.

Tip. Measure EC at the dripper and in the root zone every week and tell ORTH. In these answers it moved to the next stage only once the root-zone EC was stable.

Check yourself

1. Which water value did ORTH flag for the drippers and the root-zone pH?

2. Why does phosphorus stay low in the program?

3. If you use nitric acid against the bicarbonate, what do you lower?

More courses for tomato

Fertilization and nutrition

Meet ORTH at DATAGRI 2026 · Valladolid, 18–19 Nov · 10% off ORTH Teams & EnterpriseClaim your 10%